Wiring
28
Connect to IR and/or RS-232 devices. By default, these channels are set to
transmit IR signals.
IR Connection
Connect a transmitter cable to a set of IR and ground terminals of the Control
Box, and set up the IR transmitter on or near the IR receiving port of the IR
device.
Serial Connection
Connect a serial device's receiver (RX) and ground (GND) terminals to a set of
serial (TX) and ground (GND) terminals of the Control Box.
Unidirectional TTL Level
(0 ~ 5 V)
Baud Rate: 300 to 115200
(default: 9600)
Data Bit: 8 (default) or 7
Stop Bit: 1 (default) or 2
Parity: None (default), Even or
Odd
IR:
Blu-ray / DVD Player, TV,
Audio Receiver, Projector, etc.
RS-232:
Camera, Projector,
Switch, Audio Mixer, Multimedia
Device, etc.
Connects to
RS-232
TTL Level (0 ~ 5 V)
Carrier Frequency:
10 ~ 455 kHz
IR
or
