Chapter 4. Remote Operation
46
If the IR Serial or IR HDBT Out control method is selected, enter
a command name, and click
Learn
. Follow the procedures
explained in
Setting Up Controls to a Projector Screen
to create up to 10 commands for the assigned function key. Click
Test
to test the command you just created.
If the PJ-Link 1 or PJ-Link 2 control method is selected, set the IP
address, port, and password by clicking
and the screen below
appears. Click
Save
when you have entered the correct IP address,
port number, and password. Use the drop-down menu to select a
command, and click
Test
to test the selected command.