VP3520 User Manual
13
Setting Up Controls to a Projector Screen
To automatically bring the projector’s screen up and down by detection of
source device, follow the steps below.
1. Connect a suitable Rx device (e.g., VE802R) to the VP3520 using an
Ethernet cable, to which the display (e.g., projector) is connected.
2. To automatically bring the screen down when an input source device is
detected by the VP3520, follow the steps below.
a) Connect the screen to the unit’s relay port 1.
b) Log in the web console, go to
Audio & Video
>
Display Control
, and
then check
.
VE802R
B
