ATEN VanCryst VP3520, User Manual

Page: 37 / 89

25
Chapter 4
Remote Operation
Overview
This chapter provides information on how to remotely operate and configure
the VP3520 via the web console.
Default Network and Login Settings
The VP3520 uses the following network settings and login credentials as its
default settings.
 Default network settings
Note: If the VP3520 is connected to a router that supports DHCP, a
dynamic IP address will be assigned to the VP3520 as soon as it
connects to the network. Look up the IP address by sending a read
command via an RS-232 serial controller. For more details, see
Chapter 5, CLI Commands .
 Default login credentials
Network Parameter Default Setting
IP Address 192.168.0.60
Subnet Mask 255.255.255.0
Gateway 192.168.0.1
HTTP Port 80
Login Credential Default Setting Limitations
Username administrator 5 to 30 characters in length without special
characters, not case-sensitive
Password password