ATEN VanCryst VM3200, User Manual

Page: 54 / 209

VM3200 / VM3250 User Manual
38
5. (Optional) Connect your speakers / audio output device(s) to the Audio
port(s) of the output boards you installed.
6. (Optional) To control multiple VM3200 / VM3250 units via serial
communication, use an appropriate serial cable to connect a computer or a
serial controller to the VM3200 / VM3250’s female
RS-485 / RS-422
Serial port. Use the supplied terminal block for this connection.
7. (Optional) To remotely operate the VM3200 / VM3250 via the web
interface, plug an Ethernet cable into the Ethernet port on the VM3200 /
VM3250.
Note: For VM3200, you can also use the Video Matrix Control app to
remotely operate the unit. For more information, see Chapter 5,
Mobile Control .
8. (Optional) To control the VM3200 / VM3250 via serial communication,
use an appropriate serial cable to connect a computer or a serial controller
to the female RS-232 Serial port on the VM3200 / VM3250.
9. Plug the supplied power cord into the Primary Power Socket on the
VM3200 / VM3250, and the other end into a power source.
10. (Optional) For redundant power, plug in a power module to the Redundant
Power Slot.
Note: Secondary power modules are not part of the standard VM3200 /
VM3250 package. For more information on supported power
modules, go to
https://www.aten.com/global/en/ .
11. Ground all the connected devices in your installation.
12. Power on the VM3200 / VM3250 and all devices in the installation.