ATEN SN01 CO Series, User Manual, Page: 125 / 174

Chapter 8. Device Management
111
On the LDAP / AD server, Users can be authenticated with any of the
following methods:
 With MS Active Directory schema.
Note: If this method is used, the LDAP schema for MS Active Directory
must be extended. Without schema – Only the Usernames used on
the Serial Console Server are matched to the names on the LDAP /
LDAPS server. User privileges are the same as the ones configured
on the Serial Console Server.
 Without schema – Only Groups in AD are matched. User privileges are the
ones configured for the groups he belongs to on the Serial Console Server.
 Without schema – Usernames and Groups in AD are matched. User
privileges are the ones configured for the User and the Groups he belongs
to on the Serial Console Server.
 Settings
 Enable and enter the following information:
 Preferred Server
 Preferred Service Port
 Shared Secret 1
 Alternate Server
 Alternate Service Port
 Shared Secret 2
Timeout
Set the time in seconds that the Serial Console Server waits for
an LDAP or LDAPS server reply before it times out.
Item Action