ATEN KN1000A, User Manual, Page: 48 / 191

KN1000A User Manual
34
IPv4 Settings
The KN1000A can either have its IP address assigned dynamically at bootup
(DHCP), or it can be given a fixed IP address.
Š
For dynamic IP address assignment, select the Obtain IP address
automatically [DHCP] , radio button. (This is the default setting.)
Š
To specify a fixed IP address, select the Set IP address manually [Fixed
IP] , radio button and fill in the IP address, Subnet Mask, and Default
Gateway.
Note: 1. If you choose Obtain IP address automatically , when the switch starts
up it waits to get its IP address from the DHCP server. If it has not
obtained the address after one minute, it automatically reverts to its
factory default IP address, 192.168.0.60.
2. If the KN1000A is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, you can use the IP
installer. See
IP Address Determination , page 146, for information.
The KN1000A can either have its DNS server address assigned automatically,
or a fixed address can be specified.
Š
For automatic DNS Server address assignment, select the Obtain DNS
server address automatically , radio button.
Š
To specify a fixed address, select the Set DNS server address manually ,
radio button and fill in the required information.
Note: Specifying at the alternate DNS Server address is optional.