ATEN KN1000A, User Manual, Page: 165 / 191

Appendix
151
IPv6
At present, the KN1000A supports two IPv6 address protocols: Link Local
IPv6 Address , and IPv6 Stateless Autoconfiguration
Link Local IPv6 Address
At power on, the KN1000A is automatically configured with a Link Local IPv6
Address (for example, fe80::210:74ff:fe61:1ef). To find out what the Link
Local IPv6 Address is, log in with the KN1000A’s IPv4 address and click the
Device Information icon. The address is displayed at the bottom of the Device
Information page (see page 24).
Once you have determined what the IPv6 address is, you can use it when
logging in from a browser or the Win and Java Client AP programs.
For example:
If you are logging in from a browser, you would key in
http://[fe80::2001:74ff:fe6e:59%5]
for the URL bar.
If you are logging in with the AP program, you would key:
fe80::2001:74ff:fe6e:59%5
for the IP field of the Server panel (see The WinClient AP , page 130).
Note: 1. To log in with the Link Local IPv6 Address, the client computer must
be on the same local network segment as the KN1000A
2. The %5 is the %interface used by the client computer. To see your
client computer’s IPv6 address: from the command line issue the
following command:
ipconfig /all . The % value appears at the
end of the IPv6 address.