ATEN KN1000A, User Manual, Page: 136 / 191

KN1000A User Manual
122
Starting Up
To bring up the Log Server, either double-click the program icon, or key in the
full path to the program on the command line. The first time you run it, a screen
similar to the one below appears:
Note: 1. The MAC address of the Log Server computer must be specified in
the ANMS settings – see Log Server , page 38 for details.
2. The Log Server requires the Microsoft Jet OLEDB 4.0 driver. See The
Log Server program does not run. , page 167 if the program does not
start.
The screen is divided into three components:
Š
A Menu Bar at the top.
Š
A panel that will contain a list of KN1000A units in the middle (see The
Log Server Main Screen , page 127, for details).
Š
A panel that will contain an Events List at the bottom.
Each of the components is explained in the sections that follow.