background image

Limited Warranty 

  
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, 
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE 
USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID 
FOR THE PRODUCT. 
  
The direct vendor makes no warranty or representation, expressed, implied, or statutory 
with respect to the contents or use of this documentation, and especially disclaims its 
quality, performance, merchantability, or fitness for any particular purpose. The direct 
vendor also reserves the right to revise or update the device or documentation without 
obligation to notify any individual or entity of such revisions, or update. For further inquiries, 
please contact your direct vendor. 
 
 
 
 

 

Note: 

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instruction manual,
may cause interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: 
 
 Reorient or relocate the receiving antenna; 
 
 Increase the separation between the equipment and receiver; 
 
Connect the equipment into an outlet on a circuit different from that
which the receiver is connected; 
 
Consult the dealer or an experienced radio/television technician for
help. 
 

 
 
 
 
 
 
 
 

Summary of Contents for IC104SA












Reviews: