08
Humidity Sensor
nd one outlet
itor
ble to connect the Inlet Port
cted,
t the RJ-45 port on the
EA2310 to the GN0116.
EA2310 – Voltage Detector
The ATEN EA2310 Sensor Box is mainly used for
voltage detection. It provides one inlet a
port so installation is very simple.
Connect the power cable of the device to the mon
(e.g. Server) to the power outlet on the EA2310.
Use the bundled power ca
to the AC power source.
Once the power source and device are both conne
use a UTP cable to connec
Use the Port 31/32 voltage-type Analog Input Port
when connecting to the GN0116.
Note: Connecting to the wrong port may damage your
system.
Configuration & Operation
Ì
Once the Sensors have been installed, the
pre-configured Guardian Monitor Server can be
connected through any client computer to make
changes.
GN0116 Guardian Over the NET™
Installation Guide