01
Installation Process
Product Front View
(Front View)
1.
Programmable AC Power Outlets
Product Rear View
1.
AC Power Source Inlet
2.
Power Switch
3.
Circuit Breaker Switches
4.
485 Output: In a daisy chained installation this is
the chain out port of the parent station.
5.
485 Input: In a daisy chained installation this is
the chain in port of the child station.
6.
232C: Used for a serial connection (either from a
modem or a direct terminal connection from a
local console) for monitoring, software updating,
etc.
Ì
7.
Ethernet: Used for browser connections to the
GN0116 from remote systems.
Hardware Installation
IP Setting
Guardian Monitor Center Server
Installation
Sensor Installation
Configuration/Operation
8.
Ports101, 102; 103,104; 105,106; and 107,108 are
digital output ports. The output voltage is 12VDC;
50mA. They can operate buzzers, warning lights
and other similar devices. They can also be
connected to an extension unit and used as
programmable power outlets.
9.
Ports 1, 2 and 3, 4 are resistance type analog
input ports. The input resistance ranges from
2~205KΩ. The ports have 1024 levels of
resolution. With appropriate drivers, they can be
connected to thermistor or other
resistance-output sensors (such as CDS sensors).
10.
Ports 201,202 are digital input ports (dry contact).
They can be connected to On/Off-type output
sensors (such as intrusion, access control, smoke,
and leakage sensors).
Ì
11.
Ports 31, 32 are voltage-type analog input ports.
The input voltage ranges from 0~5VDC. The ports
have 1024 levels of resolution. With appropriate
drivers, they can be connected to sensors with
0~5 VDC output voltage, such as AC/DC voltage
sensors, current sensors and humidity sensors.
12.
Reset Switch
Ì
13.
Power Input
GN0116 Guardian Over the NET™
Installation Guide