manualshive.com logo in svg

ATEN CL1308, User Manual

Share
Download
ATEN CL1308 User Manual Download Page 5

CL1308 / CL1316 User Manual

v

Package Contents

The CL1308 / CL1316 package consists of:

Š

1 CL1308 / CL1316 LCD KVM Switch with Rack Mount Kit

Š

1 Power Cord

Š

2 Custom KVM Cables

Š

1 Firmware Upgrade cable

Š

1 User Instructions*

Check to make sure that all the components are present and that nothing got 
damaged in shipping. If you encounter a problem, contact your dealer.

Read this manual thoroughly and follow the installation and operation 
procedures carefully to prevent any damage to the unit, and/or any of the 
devices connected to it.

*

Features may have been added to the CL1308 / CL1316 since this manual 
was published. Please visit our website to download the most up-to-date 
version of the manual.

© Copyright 2015 ATEN® International Co., Ltd.

F/W Version: V1.0.072

Manual Date: 2015-04-24

ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.

All other brand names and trademarks are the registered property of their respective owners.

Summary of Contents for CL1308




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands