ATEN Altusen KN9008, User Manual, Page: 93 / 178

Chapter 7. The Windows Client Viewer
79
Hotkey Setup
Various configuration actions related to the keyboard, video, and
mouse can be performed via hotkey combinations. The actions
performed by the Hotkeys are listed at the left of the panel; the hotkeys that
invoke them are shown to the right.
An explanation of the Hotkey actions is given in the table below:
Action Explanation
Toggle screen mode Toggles the screen display between full screen and
windowed modes.
Adjust Video Brings up the Video Settings dialog box (see Video Settings ,
page 81).
Toggle OSD Toggles the Control Panel Off and On.
Toggle pointer display If you find the display of the two mouse pointers (local and
remote) to be confusing or annoying, you can use this
function to hide the non-functioning pointer. Since this
function is a toggle - use the hotkeys again to bring the
pointer display back to its original configuration.
Adjust mouse This utility synchronizes the local and remote mouse
pointers. After invoking this utility, simply click the local
mouse pointer on top of the remote mouse pointer.
Note: If you still have synchronization problems following this
procedure, see Mouse Sync Mode , page 69, and IPv6 ,
page 147 for further steps you can take to resolve the
problem.