ATEN Altusen KN9008 User Manual Download Page 4 | Manualshive

Page: 4 / 178

ATEN Altusen KN9008 User Manual Download Page 4

KN9008 / KN9016 User Manual

iv

Package Contents

The KN9008 / KN9016 package consists of:

1 KN9008 / KN9016 KVM Switch

2 Custom KVM Cable Sets (1 x PS/2; 1 x USB)

1 Console Cable

1 Firmware Upgrade Cable

1 Grounding Wire

1 Rack Mount Kit

1 Foot Pad Set (4 pcs)

1 Power Cord

1 User Manual*

1 Quick Start Guide

1 Software CD

Check to make sure that all of the components are present and in good order.
If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the switch or to any other
devices on the KN9008 / KN9016 installation.

*

Features may have been added to the KN9008 / KN9016 since this manual
was printed. Please visit our website to download the most up-to-date version
of the manual.

Copyright © 2010–2011 ATEN® International Co., Ltd.

Manual Part No. PAPE-0324-AX3G

F/W Version: v.1.2.112

Manual Date: 2011-04-27

Altusen and the Altusen logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All

other brand names and trademarks are the registered property of their respective owners.

«
...
2
3
4
5
6
...
»

Summary of Contents for Altusen KN9008



















































































































































































Reviews:

No comments