ATEN Altusen KN2116VA, User Manual, Page: 148 / 301

KVM over IP Switch User Manual
130
Power Management
The Power Management page is used to associate a PON power outlet with a
KVM port on the KVM over IP switch. Once an association has been made, the
power status of the device attached to the KVM port can be controlled from the
Port Access page, rather than having to control the power status by opening a
separate web session to the PON device.
When the Power Management page comes up, it looks similar to the one below:
Note: This page is only available when a PON device is connected to the
switch.
Š
Adding/Removing Associations:
To associate an outlet with the selected port, do the following:
1. Click Add .
The PON Mapping dialog box comes up with a list of all the outlets
available for association.