ATEN ALTUSEN KM0216 User Manual Download Page 8

Page: 8 / 89

KM0216 / KM0432 User Manual

viii

About This Manual

This User Manual is provided to help you get the most from your KM0216 /
KM0432 system. It covers all aspects of installation, configuration and
operation. An overview of the information found in the manual is provided
below.

Overview

Chapter 1, Introduction,

introduces you to the KM0216 / KM0432 system.

Its purpose, features and benefits are presented, and its front and back panel
components are described.

Chapter 2, Hardware Setup,

provides step-by-step instructions for setting

up your installation, and explains some basic operating procedures.

Chapter 3, OSD Operation,

provides detailed information for configuring

and controlling your installation using the KM0216 / KM0432’s intuitive,
mouse-driven On Screen Display (OSD) menus.

Chapter 4, Keyboard Port Operation,

explains the concepts and

procedures used to control the KM0216 / KM0432 from the keyboard.

Chapter 5, Keyboard Emulation,

lists the keys for a PC-compatible

keyboard to emulate the functions of the Mac and Sun keyboards.

Chapter 6, The Firmware Upgrade Utility,

explains how to upgrade the

KM0216 / KM0432’s flash firmware version.

An Appendix,

at the end of the manual provides technical and

troubleshooting information.

km0216-0432.book Page viii Wednesday, April 14, 2010 3:17 PM

Summary of Contents for ALTUSEN KM0216


























































































Search results

Summary of Contents for ALTUSEN KM0216

Reviews:

Related manuals for ALTUSEN KM0216

Brands by name

Popular brands

ATEN ALTUSEN KM0216, User Manual

Search results

Summary of Contents for ALTUSEN KM0216

Reviews:

Related manuals for ALTUSEN KM0216

Brands by name

Popular brands