ATEN ALTUSEN IP9001 User Manual Download Page 105

Page: 105 / 140

Last Saved Crash Screen

The Last Saved Crash Screen on the View menu allows you to see the last text-based

screen on the host system prior to its locking up or freezing during a blue screen. This

is useful because it allows you to troubleshoot the host system.

Clicking this item brings up a login screen. Provide your Username and Password,

then click Login to see the Crash Screen.

Note: 1. You must have the Java Runtime Environment (JRE) installed to view the

Crash Screen. If it isn’t already installed on your sysem, it is available for

free download from Sun’s Java site: http://java.sun.com

2. The maximum size of the Crash Screen image is 50 Kb. Therefore, only

one Crash Screen image can be saved, and only text-based crashes can be

saved. The output from a crash on a graphics based system would be too

large.

3. A captured Crash Screen image cannot be flushed from the IP9001’s

memory. It is automatically erased and replaced when the next Crash

Screen image is saved.

2005-06-09

Summary of Contents for ALTUSEN IP9001













































































































































Search results

Summary of Contents for ALTUSEN IP9001

Reviews:

Brands by name

Popular brands

ATEN ALTUSEN IP9001, User Manual

Search results

Summary of Contents for ALTUSEN IP9001

Reviews:

Brands by name

Popular brands