AER-W80
User Manual
SS Telecoms (Pty) Ltd. Proprietary Confidential
30
11
．
LAN IP Setup
Clicking on the header of the “LAN” tab will take you to “LAN” header page.
Router Setting
All settings for the internal LAN TCP/IP Setup of the Router can be viewed and changed
here.
IP Address
The “IP address” is the internal IP address of the Gateway. The default IP address is
“192.168.0.1”. To access the Web Manager User Interface, type this IP address into the
address bar of your browser. This address can be changed if needed. To change the IP
address, type in the new IP address and cl
ick “Apply”. The IP address you choose should
be a non-routable IP.
Examples of a non-routable IP are:
192.168.x.x (where x is anything between 0 and 255), and
10.x.x.x (where x is anything between 0 and 255).
Subnet Mask
There is no need to change the subnet mask. This is a unique, advanced feature of your
Gateway. It is possible to change the subnet mask if necessary; however, do not make
changes to the subnet mask unless you have a specific reason to do so. The default
setting is “255.255.255.0”.
Use Router as DHCP Server
The DHCP server function makes setting up a network very easy by assigning IP
addresses to each computer on the network automatically. The DHCP server can be
turned OFF if necessary; however, in order to do so you must manually set a static IP
address for each computer on your network. To turn off the DHCP server, de-
select “Use
Router As DHCP Server” and click “Apply”.
12
．
DMZ
Clicking on the header of the “DMZ” tab will take you to “DMZ” header page.
