19
SWIMMING POOL HEAT PUMP
SWIMMING POOL HEAT PUMP
4.5 How to change parameter setting
1. In standby status press or to find parameter 0-A and measured values of current status B-F.
2. Press & at the same time for 5 seconds continuously to activate parameter setting.
3. Change value on setting until a BEEP is heard while display remains indicating parameter with its
value flashing.
4. No pressing the controller for 5s PCB will store data automatically and return to standby status.
4.6 How to set the clock
1. In standby status press
button
,
hour
figures
will
be
flashing
and
ready
to
be
modified
by
or
.
2. Press button for second time, minute figures will be flashing and ready to be modified
by or .
3. Press button for final
confirmation
of
time
setting
.
4.7 Ho w to set time r on and time r off
1
1
1
1
1
0
a) Press to activate timer on setting, hour and minute figures will be flashing together.
b) Press again to have active hour setting, hour figure will be flashing and ready to be modified
by
or .
c) Press again to have active minute setting, minute figure will be flashing and ready to be
modified by or .
d) Press to confirm the setting and display will return to standby status. Timer on
indicator
green
light
would
be
on
as
a
symbol
.
e) Operate the same to timer off by using instead of . timer off indicator red light would be
on as a symbol.
Note
: Timer on and timer off can be selected both or separately.
4.8 How to cancel timer on and timer off
1
0
Press or to activate, relative indicator light would be flashing, press for cancellation
of timer on or timer off.
4.9 Keypad lock and unlock
Except parameter setting, in other situation press & at the same for 3 s, keypad would be locked
after BEEP . To unlock it please press both buttons together again for another 3 s.
5. Protection systems
5.1 Water flow switch
Equipped with flow switch the heat pump will not work when the filter pump is not working (and the
water is not circulating).
This system prevents the heat pump from heating only the water present in the heat pump itself.
The protection also stops the heat pump if water circulation is cut off or stopped.
