8.EXTERNAL CONTROL
External control can be enabled via following contacts. Pressing on/off can stop the pump
even if working via an external controller.
a. Digital Input
：
To enable external speed control, connect one of the digits from Di1/2/3/4 to
COM. See schematic as
b. Relay Output:
Connect terminal L & N to enable external control. An additional on
necessary while bearing power
Control system
digital input
8
EXTERNAL CONTROL (Not included in standard model)
External control can be enabled via following contacts. Pressing on/off can stop the pump
even if working via an external controller.
To enable external speed control, connect one of the digits from Di1/2/3/4 to
COM. See schematic as below:
Connect terminal L & N to enable external control. An additional on
necessary while bearing power
＜
500W, 2.5A. See schematic as below:
Relay external control output
External control can be enabled via following contacts. Pressing on/off can stop the pump
To enable external speed control, connect one of the digits from Di1/2/3/4 to
Connect terminal L & N to enable external control. An additional on-off is
Relay external control output
Summary of Contents for ATECF11
Page 1: ......
Page 40: ...Version AT001 ...
