ATC VARENA 1000, Instructions For Use & Installation

Page: 3 / 20

VARENA
A73023342 3
IMPORTANT:
- In order to avoid overheating, do not cover the heater.
The heater itself is marked with the standard
"Do not cover" symbol.
- You must not sit on the radiator.
- This appliance is not intended for outdoor use.
- If the power cord is damaged, it must be changed by the
manufacturer, its after-sales service or persons qualified to do
so, to avoid possible danger.
- The radiator should not be located underneath an electrical
connection. The electric supply line should be protected with
a high sensitivity differential device (RCBO).
- The radiator must be installed so that around it there is
sufficient space for proper circulation of hot air, with a
minimum distance of 100 mm to curtains, furniture, etc.
Anyone who is in the bathtub or shower should not have
access to the switches and other power operation devices.
Always keep at least 0.6 m between the radiator and the bath
or shower (UK: Outside zone 2, Ireland: Outside zone 3).
- Mounting is an important part of safety. To perform the
correct installation, go to Mounting section.
- This heating apparatus holds a specific amount of special
oil. Repairs where it is necessary to open the oil tank, must
only be made by the manufacturer or ATC. ATC should be
contacted in case of any oil leakage.