7
GETTING STARTED
Getting Started
Installing the Nano-SIM Card and the
microSDXC Card
You do not need to power off your tablet before installing or
replacing the nano-SIM card or before installing or removing the
microSDXC card (not included). You need to unmount the microSDXC
card before removing it (see Connecting to Networks and Devices –
Using the microSDXC Card as Portable or Internal Storage).
Warning!
To avoid damage to the tablet, please only use a
standard nano-SIM card. You can obtain a standard nano-SIM
card from your service provider.
1. Open the nano-SIM/microSDXC card
cover on the back of the tablet.
2. Insert the nano-SIM card into the
nano-SIM card slot or the microSDXC
card (not included) into the microSDXC
card slot with the contacts facing down.
3. Close the cover.
Charging the Battery
Your tablet’s battery should have enough power for the tablet to
turn on and find a signal. You should fully charge the battery as
soon as possible.
If the battery is low, there will be a pop-up message on the
screen. As you charge your tablet, the screen will tell you the
exact battery level each time you wake up your tablet.
Summary of Contents for TREK 2 HD
Page 1: ...User Guide AT T TREK 2 HD...
Page 120: ...118 Notes NOTES...
