AT&T TL92151 User Manual Download

Page: 98 / 130

Appendix

Other handset

is calling

(For models with two handsets only)

The other handset is calling.

Out of range

No power at

base

The handset has lost communication with the
telephone base.

There is no power connected to the telephone base.

** Paging **

The telephone base is paging all handsets.

Place

in charger

The battery is very low. The handset should be placed in
the telephone base or charger.

PTT From

HANDSET X

handset Y

One handset has started a PTT session to another
handset.

PTT To

HANDSET X

You have started the PTT process.

Push to talk

Ended

The PTT session is ended.

Put handset

on BASE

to register

Your handset is not registered to the telephone base.

Rec mem full

The answering system has no recording time left.

Ringer muted

The ringer is muted temporarily during an incoming call.

Rec mem low

The answering system has less than three minutes
to record.

Registration

slots are full

The telephone base already has the maximum of 12
handsets registered to it.

Saved

The entry is now saved in the directory.

Unable to save

You are trying to save an entry with no name and
number from the caller ID history.

XX Missed calls

There are new calls in the caller ID history.

XX New messages

There are new messages recorded in the answering
system.

Screen messages

Summary of Contents for TL92151



































































































































Search results

Summary of Contents for TL92151

Reviews:

Related manuals for TL92151

Brands by name

Popular brands

AT&T TL92151, User Manual

Search results

Summary of Contents for TL92151

Reviews:

Related manuals for TL92151

Brands by name

Popular brands