54
Multiple handset use
Push-to-talk (PTT)
PTT to a single handset
You have 2 ways to begin a PTT call:
If you have two handsets, press and hold
PUSH TO TALK
when the
handset is not in use.
-OR-
If you have three or more handsets, press
PUSH TO TALK
when the
handset is not in use. Then, use the dialing keys to enter a handset
number (
1
-
9
for handsets 1-9,
TONE
and
0
for handset 10,
TONE
and
1
for handset 11 or
TONE
and
2
for handset 12), or press
CID
or
DIR
to scroll to the desired handset, then press
SELECT
or
PUSH TO TALK
to create the push-to-talk session.
Your handset displays
Connecting to HANDSET X...
for a few seconds.
When the connection is made, both your and the destination handsets
display
Press and hold [PTT] to talk
and beep once.
Press and hold
PUSH TO TALK
on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast
to the destination handset. While you are speaking, the handset displays
PTT To HANDSET X
(
X
represents the destination handset number).
Release
PUSH TO TALK
after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold
PUSH TO TALK
to continue
speaking or the destination handsets can respond (see
Answer a PTT call
on page 56).
To end the PTT call, press
OFF/
CANCEL
or
END
. The handset displays
Push to talk Ended
for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
NOTE:
After
PUSH TO TALK
is released, the PTT call remains open for a short time. If no
one presses
PUSH TO TALK
within 10 seconds, the PTT call ends automatically.
1.
•
•
2.
3.
4.
5.
