AT&T TL7600 User Manual Download Page 55 | Manualshive

Page: 55 / 61

background image

50

Appendix C

Limited warranty

3.  How long is the limited warranty period?
  The  limited  warranty  period  for  the  PRODUCT  extends  for  ONE
(1)  YEAR  from  the  date  of  purchase.  If  the  manufacturer  repairs  or
replaces a materially defective PRODUCT under the terms of this limited
warranty, this limited warranty also applies to repaired or replacement
PRODUCT for a period of either (a) 90 days from the date the repaired
or replacement PRODUCT is shipped to you or (b) the time remaining
on the original one-year limited warranty; whichever is longer.

4. What is not covered by this limited warranty?
This limited warranty does not cover:

PRODUCT  that  has  been  subjected  to  misuse,  accident,  ship-
ping or other physical damage, improper installation, abnormal
operation or handling, neglect, inundation, fire, water, or other
liquid intrusion; or
PRODUCT that has been damaged due to repair, alteration, or
modification by anyone other than an authorized service repre-
sentative of the manufacturer; or
PRODUCT to the extent that the problem experienced is caused
by signal conditions, network reliability or cable or antenna sys-
tems; or
PRODUCT to the extent that the problem is caused by use with
non-AT&T accessories; or
PRODUCT  whose  warranty/quality  stickers,  PRODUCT  serial
number plates or electronic serial numbers have been removed,
altered or rendered illegible; or
PRODUCT purchased, used, serviced, or shipped for repair from
outside  the  United  States  of  America  or  Canada,  or  used  for
commercial or institutional purposes (including but not limited
to products used for rental purposes); or

•

•

•

•

•

•

«
...
53
54
55
56
57
...
»

Summary of Contents for TL7600






























































Reviews:

No comments

Related manuals for TL7600

Brand: Jawbone Pages: 16

Brand: Lucid Sound Pages: 4

Brand: Blackfire Pages: 20

NoizeBarrier Range SA

Brand: Otto Pages: 12

Brand: Gembird Pages: 12

Brand: Jabra Pages: 2

Brand: Agent Pages: 18

Brand: Logitech Pages: 6

Brand: Sony Ericsson Pages: 36

Brand: hi-Fun Pages: 28

Brand: NATIVE UNION Pages: 40

PELTOR LiteCom Plus MT7H7 4410-EU Series

Brand: 3M Pages: 268

Brand: Iluv Pages: 19

Brand: Iluv Pages: 20

Brand: Arion Pages: 20

Brand: FCCID Pages: 18

Brand: OCULUS Pages: 10

Brand: Jabra Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands