AT&T TL7600 User Manual Download Page 2

Page: 2 / 61

Congratulations

on your purchase

of this AT&T product.

Before using this AT&T product, please read the

Important safety information

on pages 39-42 of this manual. Please thoroughly

read the user’s manual for all the feature operations

and troubleshooting information necessary to install

and operate your new AT&T product. You can also

visit our website at

www.telephones.att.com

or call

1 (800) 222-3111

In Canada, dial

1 (866) 288-4268

Model #

: TL7600

Type:

DECT 6.0 expansion headset

Serial #:

(found on the bottom of the headset charger)

Purchase date:
Place of purchase:

AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a

AT&T Intellectual Property licensed to Advanced American Telephones.

Printed in China.

Save your sales receipt and original packaging in case it is necessary
to return your telephone for warranty service.

Summary of Contents for TL7600






























































Search results

Summary of Contents for TL7600

Reviews:

Related manuals for TL7600

Brands by name

Popular brands

AT&T TL7600, User Manual

Search results

Summary of Contents for TL7600

Reviews:

Related manuals for TL7600

Brands by name

Popular brands