background image

29

Limited warranty

Appendix

3.  How long is the limited warranty period?

The limited warranty period for the PRODUCT extends for ONE (1) 
YEAR from the date of purchase. If the manufacturer repairs or 
replaces a materially defective PRODUCT under the terms of this 
limited warranty, this limited warranty also applies to repaired or 
replacement PRODUCT for a period of either (a) 90 days from the 
date the repaired or replacement PRODUCT is shipped to you or, 
(b) the time remaining on the original one-year limited warranty; 
whichever is longer.

4.  What is not covered by this limited warranty?

This limited warranty does not cover:

PRODUCT that has been subjected to misuse, accident, shipping or 
other physical damage, improper installation, abnormal operation 
or handling, neglect, inundation, fire, water, or other liquid 
intrusion; or
PRODUCT that has been damaged due to repair, alteration, 
or modification by anyone other than an authorized service 
representative of the manufacturer; or
PRODUCT to the extent that the problem experienced is caused by 
signal conditions, network reliability or cable or antenna systems; 
or
PRODUCT to the extent that the problem is caused by use with 
non-AT&T accessories; or
PRODUCT whose warranty/quality stickers, PRODUCT serial 
number plates or electronic serial numbers have been removed, 
altered or rendered illegible; or
PRODUCT purchased, used, serviced, or shipped for repair from 
outside the United States of America or Canada, or used for 
commercial or institutional purposes (including but not limited to 
products used for rental purposes); or
PRODUCT returned without a valid proof of purchase (see item 6 
below); -or-
Charges for installation or setup, adjustment of customer controls, 
and installation or repair of systems outside the unit.

Summary of Contents for TL 7610







































Reviews: