5
Power/End button
The
button is used to:
Turn on your phone:
Press and hold the
button until you hear the audio message,
“Welcome to SpareOne”.
Turn off your phone:
Press and hold the
button until you hear the audio message,
“SpareOne is turning off. Goodbye”.
Clear entries in the dial buffer:
Press the
button to delete any entries in the dial
buffer. You will hear a “ding” upon release of the
button.
Note:
The Dial buffer refers to onboard memory that stores any key presses prior to pressing
button.
End or reject a call:
Press the
button.
(For more information, see
Phone Basics – Phone Calls
on page 11)
Cancel a missed call notification or voicemail notification:
Press
button during
the missed call notification or voicemail notification.
Keypad buttons
The keypad buttons are used to:
• Dial a number
• Execute commands
(For more information, see
Appendix A: Keypad Commands
on page 18)
Note:
Keypad commands are only supported while the phone is idle.
• Program speed dial numbers
(For more information, see
Phone basics – Speed Dial
on page 14)
Keypad lock & unlock button
Lock and unlock your keypad:
Press and hold the
button for 3 seconds until you
SpareOne at a Glance
Summary of Contents for SPAREONE
Page 1: ...SpareOne Emergency Phone User Guide ...
Page 3: ......
Page 36: ...31 ...
Page 37: ...32 ...