AT&T SB67108 - AT&T User Manual Download

Page: 67 / 110

You can dial, delete or edit a directory entry (name and number) when it is
shown on the telephone base screen. You can use the directory review or
search (pages 59-60) to show an entry.

Display dial

When a number is displayed on the screen, you can dial the number by lifting
the corded handset, pressing

SPEAKER

LINE 1

LINE 4

for the desired line.

Delete an entry

When a directory entry appears, press

REMOVE

on the

telephone base to delete the displayed entry from the
directory. You cannot retrieve a deleted entry.

Delete all entries

When the telephone is idle, press

press

MENU

/ENTER

twice to select

Directory

-OR-

Press

DIR

on the telephone base.

2. Press

REMOVE

and the screen displays

Delete entire

directory? <=No >=Yes

. Press

SKIP

to confirm or

press

REP

to return to the previous screen.

NOTE:

You cannot retrieve deleted entries.

Edit an entry

1. When a directory entry appears, press

MENU/

ENTER

2. Follow Steps 3 to 5 on pages 57-58.

NOTE:

If the telephone number in the directory exceeds 16 digits,

appears in front of the telephone number in the editing screen.

Press

REP

to move towards the beginning of the telephone number

or press

SKIP

to move towards the end of the telephone number.

Summary of Contents for SB67108 - AT&T















































































































Search results

Summary of Contents for SB67108 - AT&T

Reviews:

Related manuals for SB67108 - AT&T

Brands by name

Popular brands

AT&T SB67108 - AT&T, User Manual

Search results

Summary of Contents for SB67108 - AT&T

Reviews:

Related manuals for SB67108 - AT&T

Brands by name

Popular brands