AT&T Network Adapter 25, Installation And Maintenance Manual

Page: 343 / 438

APPENDIX E: Administration Codes and Data
Table E-K.
PORT/PDC Administration, Data Terminals (Menu=1/2)
(Contd)
ACTION
DESCRIPTION
DATA
67 Allow terminal to operate at a baud rate
[1=Y/0=N]
of 9600 bps†
68
Allow terminal to operate at a baud rate
[1=Y/0=N]
of 19200 bps†
69 Assign this parity setting to correspond
[0-3; 2]
with terminal’s parity setting†
0= Bit in parity
position (no parity);
1 =Bit in parity
position (no parity)
2=Even parity;
3= Odd parity
70
Allow keyboard dialing/Command Mode†
[1=Y/0=N]
71
Allow user configuration of data port
[1=Y/0=N]
parameters.† (The default is 0 for
STARLAN CP.)
72
Allow mismatch of user’s data module
[1=Y/0=N]
and data port baud rate†
73 Allow characters dialed from keyboard
[1=Y/0=N]
to be echoed by the data port†
74 Enter your disconnect code†
[1=2 short BREAKS/
0=1 long BREAK]
75
Allow call progress text messages to be
[1=Y/0=N]
displayed on screen.†
77
Display connection indication message†
[1=Y/0=N]
90
Assign/remove DDC Display ID
["11 characters
or less", or ""
to remove]
† Read-only for STARLAN CP.
E-24