manualshive.com logo in svg

AT&T Merlin Legend BIS10, User Manual

Share
Download
AT&T Merlin Legend BIS10 User Manual Download Page 68

Glossary

account code
entry

alarm

assigned button

assigned feature

automatic
intercom

BIS

busy-to-idle
reminder

call
accountability

call waiting

callback

conferencing

feature that allows you to assign account
codes to calls to charge them to specific
customers, clients, or business cases.

feature that warns you of system problems.

button that may be given to you as an
optional feature.

optional feature that can be distributed by
the System Administrator.

feature that allows two people to each have
a dedicated button for calling each other.

(Built-in-Speakerphone) name of a multiline
telephone that allows you to listen and
speak on any call without lifting the
handset.

feature that automatically notifies you
when a person or line is available.

feature that allows you to make calls at
another telephone and charge them to your
extension number.

a telephone feature that notifies you of an
incoming call while on another call.

feature that allows you to request the use of
a busy extension or line. The system will
signal your telephone when the telephone
or line is available.

feature that allows you to have up to five

parties on a call.

65

Summary of Contents for Merlin Legend BIS10












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands