AT&T Merlin Legend BIS10 User Manual Download Page 67

Page: 67 / 75

Transfer

You can easily transfer calls to another System 25 telephone.
You can also transfer some calls to outside lines. However, you
should see your System Administrator for more information

about this type of transfer.

When you transfer a call, the original person is temporarily
placed on hold and is not connected to the other person until

you hang up. At that time, the call disappears from your

telephone.

Transferring Calls

The light next to the button of the call on hold blinks.

Dial the other person's extension or press a line button, such

NOTE:

If you misdial the number, return to the person on

hold by pressing the button next to the blinking light. Then
return to Step 1 and continue.

Hang up if you do not want to announce the call.

Otherwise, announce the call and then hang up to complete
the transfer.

NOTE:

If the person you attempt to call does not answer,

press the button next to the blinking light to return to the call
on hold.

Summary of Contents for Merlin Legend BIS10












































































Search results

Summary of Contents for Merlin Legend BIS10

Reviews:

Related manuals for Merlin Legend BIS10

Brands by name

Popular brands

AT&T Merlin Legend BIS10, User Manual

Search results

Summary of Contents for Merlin Legend BIS10

Reviews:

Related manuals for Merlin Legend BIS10

Brands by name

Popular brands