AT&T EL52201 User Manual Download Page 10

Page: 10 / 83

Getting started

Battery installation and charging

Battery installation

Install the battery as shown below.

ImpOrTANT INFOrmATION:

Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,
visit our website at

www.telephones.att.com

or call

1 (866) 288-4268

Battery

Pack

162342/BT26234

2.4V 300m

Ah Ni-M

NING:DO NO

T BURN OR

PUNCTURE

TTERIES

MADE IN

CHIN

CR092

Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.

Insert the supplied
battery with the label

THIs sIDE up

facing

up as indicated.

Align the cover flat
against the battery
compartment, then
slide it upwards until
it clicks into place.

Charge the handset by placing it
face up in the telephone base or
charger. The

CHArGE

light is on

when charging.

To replace the battery, press
the tab and slide the battery
compartment cover downwards.
Lift out the old battery and
disconnect it from the handset.
Follow the instructions above to
install and charge the new battery.

CHArGE

light

Summary of Contents for EL52201




















































































Search results

Summary of Contents for EL52201

Reviews:

Related manuals for EL52201

Brands by name

Popular brands

AT&T EL52201, User Manual

Search results

Summary of Contents for EL52201

Reviews:

Related manuals for EL52201

Brands by name

Popular brands