Select Button
[
✓
]
To use any of the
1 Choose any of the following after pressing
-Select
:
features that require
●
the Select button
Press
Drop-Test
to initiate a self-test of your telephone
lights, ringer, and display. For procedures, see “Self-
Test” in this section.
(
-Select
)
●
●
Press
Conference-Ring
to select one of 8 personalized ringing
patterns for your telephone. For procedures, refer to
“Select Ring” in this section.
Press
Speaker-Reset Spkr
to adjust the sound level and
quality of your built-in speakerphone. Use whenever
you move your telephone to a different location (even
in the same room), when the telephone is unpluggd,
or when there has been a power failure. For
procedures, refer to “Speakerphone” in this section.
Select Ring (and Ringer Volume)
[
✓
]
To select a personalized
1
ring
2
●
Press
Conference-Ring
●
●
3
4
While on-hook, press
-Select
Green light goes on steadily
Green light next to
-Select
flutters; current ringing
pattern plays and repeats every 4 seconds
Display shows [
PERSONAL RING #x
] (x will be a
number from 1 to 8)
Continue to press
Conference-Ring
to cycle through all 8
ringing patterns
When you hear the desired ringing pattern, press
-Select
again
●
Your new ring is set; green light next to
-Select
goes
off
Note:
If you receive a call, go off-hook, or lose power
during selection, process is interrupted and you must
start again. If you lose power after you have selected
your personalized ring you will have to select your
ring pattern again.
25
