Multiple handset use
Push-to-talk (PTT)
Make an outgoing call during �TT call
During a one-to-one PTT call, press
�HONE/
FLA�H
on your handset or
/��EA�ER
on your telephone base to get a dial tone. The PTT call
ends automatically.
During a one-to-group PTT call, press
�HONE/
FLA�H
on the initiating
handset or
/��EA�ER
on the initiating telephone base. The PTT call
ends automatically and you get a dial tone.
During a one-to-group PTT call, press
�HONE/
FLA�H
on any one of the
destination handsets or press
/��EA�ER
on the destination telephone
base. That device gets a dial tone. The PTT call continues for the rest of
the PTT participants.
End or leave a �TT call
For one-to-one PTT calls, both initiating and destination devices can end the
PTT call. For PTT calls to multiple devices, the initiating device can end the
PTT call. If any one of the destination devices leaves the PTT call, the call
continues until all participants or the initiator hangs up.
Press
OFF/
CANCEL
on the handset, or press
CANCEL
on the telephone
base. The screen shows
�ush to talk Ended
.
-OR-
Place the handset in the telephone base or charger, then the handset
return to idle mode.
NOTE:
After
�U�H TO TAL�
on the handset or
�TT
on the telephone base is released, the PTT
call remains open for a short time. If no one presses
�U�H TO TAL�
on the handset or
�TT
on
the telephone base
within ten seconds, the PTT call ends automatically.
•
•
•
57
