Adding and registering handsets/headsets/speakerphones
Your telephone can support up to 12 DECT 6.0 cordless handsets (AT&T model
CL80114, sold separately) or up to ten cordless handsets and two cordless
headsets or speakerphones (sold separately). Visit
www.telephones.att.com/headsets
for a list of compatible DECT
6.0 cordless headsets. Each new handset, headset or speakerphone must be
registered to the telephone base before use. You must register each handset,
headset or speakerphone separately.
To register a cordless headset or speakerphone to this telephone system,
please refer to the corresponding user’s manual for details. To register a
cordless handset, see below.
The handsets provided within your product box are already registered as
HAND�ET 1
,
and so forth. Additional handsets are assigned numbers in the
sequential order they are registered (up to
HAND�ET 12
).
Register a handset to the telephone base
NOTES:
Make sure the handset is out of the telephone base or charger and shows
To register H�,
see manual
.
When the telephone base prompts you to set the date and time, follow the instructions in
the user’s manual to set it or skip the setting by pressing
CANCEL
.
After the date and time setting is done or skipped, the telephone base will prompt if you want
to set up the answering system. Press
MENU
/�ELECT
to start the setup via voice guide or press
CANCEL
to skip the setup. The telephone base now enters idle mode.
1. On the telephone base, press and hold /
HAND�ET
LOCATOR
for about five seconds. Then, release the button
after the
IN U�E
light turns on and the screen shows
Registering... �lease wait
.
2. On the handset, press
QUIET #
(pound key)
immediately
and the screen shows
Registering... �lease wait
.
3. When the registration process completes,
HAND�ET
X Registered
appears on both the handset and the
telephone base screens ((
HAND�ET
represents the
handset name,
X
represents the handset number)
.
Both
the handset and the telephone base beep and the
IN U�E
light turns off. The handset is now registered with the
telephone base.
•
•
•
To register HS,
see manual.
Registering...
Please wait
HANDSET X
Registered
Appendix
103