AT&T CL83114 Complete User'S Manual Download Page 115

Page: 115 / 141

Appendix

Screen display messages

�creen messages

BASE 0
is calling

The telephone base is calling.

Blocked call

An incoming call is blocked.

Block list
is empty

There are no block list entries.

Call
transferred

You have transferred an outside call to another device.

Caller ID log
empty

There are no entries in the caller ID log.

Calling
BASE 0

The handset is calling the telephone base (for intercom calls).

Calling
HANDSET X

The handset or telephone base is calling another handset (for

intercom calls).
The telephone base is transferring an outside call to a handset.

Call answered

The answering system has answered an incoming call.

Contact deleted

A directory entry is deleted.

Directory empty

There are no directory entries.

Directory full

The directory is full. You cannot save any new entries unless

you delete some current entries.

Ended

You have just ended a call.

HANDSET X
is calling

Another system handset is calling.

Incoming call

There is a call coming in.

Intercom

The device is on an intercom call.

Intercom ended

The intercom call has just ended.

INTERCOM TO:

You have started the intercom process, and need to enter the

number of the device you wish to call.

Line in use

An extension phone, or one of the devices is in use.

Low battery

The battery is low. You should charge the battery.

Microphone ON

Mute is off so the other party can hear your voice.

Muted

The microphone is off. The other party cannot hear you.

New voicemail

There are new voicemail messages from your telephone

service provider.

109

Summary of Contents for CL83114














































































































































Search results

Summary of Contents for CL83114

Reviews:

Related manuals for CL83114

Brands by name

Popular brands

AT&T CL83114, Complete User'S Manual

Search results

Summary of Contents for CL83114

Reviews:

Related manuals for CL83114

Brands by name

Popular brands