ATAGO 5050, Instruction Manual

Page: 16 / 28

- 10 -
1. Tolerance Setting
Set upper and lower limits for a scale, and the indicator will light up to notify if a measurement falls within or outside the tolerance.
N
For angle of rotation, switch scale in measurement mode.
Range: -999 to +999
Resolution
(regardless of positive or negative value)
:
> 100 : 1
10.0 to 99.9 : 0.1
< 9.99
: 0.01
[Factory default: lower limit = -25.0，upper limit = +25.0 in Angle of Rotation
(Conversion to 100mm optical path length)]
G
Confirm the scale. "Ｏptical path length" will flash. (For
angle of rotation.)
G
Confirm the upper limit.
How to access the setting ( r page 9)
-c J . U
[1]
G
① →While ⑴ is flashing a Select the sign by or H .
② →While ⑵ is flashing a Increase the value by .
a
Decrease the value by
H
.
③ →While ⑶ is flashing a Choose to insert a decimal point by
or
H
.
④ →While ⑷ is flashing a Same as ② above.
⑤ →While ⑸ is flashing a Same as ③ above.
⑥ →While ⑹ is flashing
a
Same as ② above.
⑵ Value
- 0.0.0
S H .. i
Enter the upper limit.
⑹ Value
⑸ Decimal
⑸ point
⑷ Value
⑶ Decimal
⑸ point
- 4 . 0.0
S L .. o
Enter the lower limit.
- E . n . d
G
Return to the measurement mode.
G
Confirm the lower limit.
“
SEt
”
will flash on the display.
F
-c J . U
[1]
Exit the setting.
N Press G to continue to edlit
the setting.
N The tolerance range is different
from the display range.
m Set the upper and lower limits to
0.00 to turn off the measurement
evaluation indicator.
N The last used scale will be selected
upon returning to the measurement
mode.
⑴
Sign
N
When cancelling settings, press
F
. Proceed
to lower limit value input.
N
When cancelling settings,
press
F
.
F
F
- S . r
S J . U
Specific Rotation
- r . o . t
S J . U
Angle of Rotation
F
- c . o . n
S J . U
Concentration