ATAGO 5050, Instruction Manual

Page: 10 / 28

- 4 -
3. Battery Replacement

CAUTION
●
When the battery icon indicates the low power level ( ), replace all four batteries
with a brand new set of AAA alkaline batteries (1.5V).
●
Check the expiration dates on batteries before purchase.
●
Remove the battery from the unit when the unit is not to be used for a month or so.
①Turn the screw counterclockwise
with a flat-head screwdriver or a
coin to open the battery
compartment.
②Insert the batteries, observing the
correct polarity.
③Close the battery compartment and
turn the screw clockwise.
4. Power ON/OFF
Powering on
①Press I .
Turn the instrument on in the measurement mode.
The backlight stays lit for 1 minute.
The cursor indicates the last used scale.
N
The backlight stays on for 1 minute after any button
is pressed.
N
To access the settings, while the power is turned on,
press and hold H , then 1 second later, press
I
(
r
page 9).
Powering off
①Hold down
I
.
The screen will turn off.
N
The instrument will turn itself off after 4 minutes of
inactivity by default.
The auto shutdown timer can be extended to 10
minutes or 30 minutes (
r
page 13).
g g
g
Open Close