Atag WS90211MX, Instructions For Use Manual

Page: 101 / 112

WARNING!
Never open the casing of the appliance.
• Disconnect the appliance from the mains supply before starting
any repair work.
• We advise you to wear protective gloves when assembling the
cooker hood because of the possible sharp edges.
• The distance between the lowest point of the cooker hood and
the supporting surface for the cooking vessels gas hob should
be at least 65 cm.
• If the instructions of the gas hob specify a greater distance, this
has to be taken into account.
WARNING!
Failure to install screws or fixing devices in accordance with these
instructions may result in an electrical hazard.
If the safety instructions and warnings are not followed, the
manufacturer cannot be held responsible for any resulting damage.
If you decide to discontinue using the appliance because of a fault,
we recommend you cut off the cable after removing the plug from
the plug socket. Take the appliance to your municipality’s waste
disposal site.
Place the appliance in an environment that meets the following
conditions:
• Ambiant temperature range: +5….+40 °C;
• Humidity: 30….70% RH;
• Maximum altitude: 2000 meters above sea level.
17
Installation