21
Run through the time bar
using the arrow keys
up
until 23:00 hours inclusive;
Press
(SET);
Press
(T3);
Run through the time bar
using the
key up until
00:00 hours inclusive;
The small blocks that are no
longer flashing have been
set. Consequently, for 16:00
to 00:00 hours inclusive
(=24:00) T3 has now been set. Straightaway the change has
now been implemented.
Copy day program to the following day
When the screen shows MA you can use the arrow keys in the
time bar to proceed to the next or previous day. For instance,
you will see MA (Monday) change into DI (Tuesday). In this
way you can program the whole week. You can also copy the
Monday setting to Tuesday. Proceed as follows:
Using this example you can program every day to meet your
requirements. The week program works immediately in ac-
cordance with the time and
temperatures set.
Move to the day you wish
to copy, for instance. MA
(MON);
Press
(COPY);
Press
(DAY);
You are now on the next day,
Tuesday (DI).
You can now see that Tues-
day is set the same way as
Monday.
