Atag SQ4211BUU, Manual

Page: 10 / 52

10
Using This Manual (Continued)
Causes of damage
Very dirty seal If the seal on the outside of the cooking compartment is
very dirty, the cooking compartment door will no longer
close properly during operation . The fronts of adjacent
units could be damaged . Keep the seal clean .
Cooking compartment door
as a seat Do not stand or sit on the cooking compartment door .
Transport Do not hold or carry the appliance by the door handle .
The door handle cannot hold the weight of the appliance
and may break off .
Important information about installing the combi steam
oven
•
This appliance is NOT intended for use in a commercial environment .
•
Please observe the installation instructions provided and note that this appliance should
only be installed by a qualified technician.
•
The appliance is fitted with a plug and must only be connected to a properly installed
earthed socket . The fuse protection must be rated at 16 amps (L or B-type miniature
circuit breakers) .
•
In case a new socket is needed, installation and cable connection must only be done
by a qualified electrician. If the plug is no longer accessible following installation, a pole
disconnecting device must be present on the installation site with a contact gap of at
least 3 mm .
•
Adapters, multiway strips and extension cords must not be used . Overloading can result
in fire.
• Plug in
When the appliance has been connected for the first time, all segments are lit for a
second. After 3 seconds, 12:00 flashes in the display prompting you to select the clock.
Do not forget to reset the clock when you switch to and from summer or winter (see the
instructions on page 12) .
SQ4211BUU_A01-DE68_03594N_EN.indd 10 2009-12-25 12:32:59