EN 31
MAINTENANCE
Disassembly of the oven door
In normal use, the oven door will not need to be removed. However,
should you want to do this, please follow the instructions below.
Warning!
The oven door is very heavy and should be well supported.
1. Open the door and tilt lock A in both hinges fully to the outside.
2. Close the oven door halfway, so that the tension is off of the
springs (the oven door will be at an angle of approximately 30°).
3. Hold the door securely at both sides, move along with the closing
movement of the door, while simultaneously lifting the door.
4. Turn the lower part of the door with the hinges B towards you. The
door has now been removed.
5. Clean the door. The door may optionally be tilted so as to clean the
space between the glass with a soft bottlebrush.
To put the door back in place, proceed in reverse order. The door
hinges are in the extended position.
6. Slide the door hinges into the hinge openings.
7. Tilt the door in the horizontal position and click the hinges in place
by tilting lock A back inwards.
Please note:
the hinge protectors must always be secured again after
replacing the oven door.
Summary of Contents for FG1011DA
Page 42: ...NL 42...
