Atag CG9271MB, Instructions For Use Manual

Page: 49 / 70

GB 15
Switch the hob to (standard) lock mode
One or more cooking zones are active.
• Touch and hold the (child) lock button.
Attention! All of the set cooking processes remain active.
The red light to the right of the (child) lock button is constantly
illuminated. All of the buttons are inactive, except for the (child) lock
button and the On/Off button.
• Touch and hold the (child) lock button again to switch off the lock
mode and unlock the control panel.
Switching on the child lock
The hob is in stand-by mode. The display for each cooking zone shows
“0.”.
• Touch and hold the (child) lock button to switch on the (child) lock.
The red light to the right of the (child) lock button is constantly
illuminated.
If no buttons are touched within 10 seconds, the cooking zone will
automatically switch off. The child lock remains active. You can even
switch off the hob:
• Touch the (child) lock button again within 10 seconds to switch off
the child lock and unlock the control panel.
• You must wait 10 seconds before switching the hob on again with
the On/Off button in order to switch off the child lock.
Tip
Switch the hob to (child) lock mode before cleaning it to prevent it
accidentally switching on.
Pause
Use the pause function to ‘pause’ the whole hob for 5 minutes while
cooking. The power supply to the cooking zone stops, without losing
any settings. Please note the cooking zone will remain hot for some
time. Preferably remove delicate dishes from the cooking zone.
Switching the hob to pause mode
One or more cooking zones are active.
• Touch the pause button once.
▷
You will hear a single beep. “| |” is shown in the display for each
cooking zone and the red light to the right of the pause button is
constantly illuminated.
OPERATION CERAMIC