ASV RC30, Service & Repair Manual

Page: 107 / 117

All Surface Loader
16. Maintenance
16-4
Track Tension Adjustment Procedures
Figure 16-8 16-005
1. Locate the jam nut on the track tensioner and
clean the threads thoroughly before proceeding.
Figure 16-9 16-006
2. Loosen the jam nut. You can use the wrench
supplied with the machine, but a standard
wrench is preferred for shop use.
Figure 16-10 16-007
3. After loosening the jam nut, turn the track ten-
sioner until the track tension is within specifica-
tions.
4. Once proper tension is achieved, retighten the
jam nut
Checking for Proper Track Adjustment
1. Drive the machine forward five feet.
Figure 16-11 16-008
2. Lay a straightedge along the top of the track be-
tween the sprocket and the front idler wheel.
3. Using a rope or wire, put 50 pounds of down
force on the track at the midpoint of the straight-
edge.
Figure 16-12 16-009
4. Using a ruler, measure the distance between the
straightedge and track. The track should not de-
flect more than 0.75 inch between the top of the
track and the straightedge.
5. If the track deflects more than 0.75 inch, tighten
the track.
Jam
Nut
Track
Tensioner
https://www.tractormanualpdf.info/