ASUSTeK COMPUTER ROG Rapture GT-AC5300 User Manual Download Page 50

Page: 50 / 152

To monitor your USB device:

1. From the navigation panel, go to

Advanced Settings

Network Map

2. On the Network Map screen, select the

USB Disk Status

icon

to display your USB device’s information.

3. On the AiDisk Wizard field, click

to set up an FTP server for

Internet file sharing.

NOTES

• For more details, refer to the section

4.6.2 Using Servers Center

in this user manual.

• The wireless router works with most USB HDDs/Flash disks (up to

4TB size) and supports read-write access for FAT16, FAT32, NTFS,

and HFS+.

Safely removing the USB disk

IMPORTANT

: Incorrect removal of the USB disk may cause data

corruption.

To safely remove the USB disk:

1. From the navigation panel, go to

General

Network Map

2. In the upper right corner, click

Eject USB disk

. When

the USB disk is ejected successfully, the USB status shows

Unmounted

Summary of Contents for ROG Rapture GT-AC5300

























































































































































Search results

Summary of Contents for ROG Rapture GT-AC5300

Reviews:

Related manuals for ROG Rapture GT-AC5300

Brands by name

Popular brands

ASUSTeK COMPUTER ROG Rapture GT-AC5300, User Manual

Search results

Summary of Contents for ROG Rapture GT-AC5300

Reviews:

Related manuals for ROG Rapture GT-AC5300

Brands by name

Popular brands