ASUSTeK COMPUTER ROG Rapture GT-AC5300 User Manual Download Page 138

Page: 138 / 152

138

WARNING!

• This radio transmitter (3568A-RTGZ00) has been approved by

Industry Canada to operate with the antenna types listed below with

the maximum permissible gain and required antenna impedance for

each antenna type indicated. Antenna types not included in this list,

having a gain greater than the maximum gain indicated for that type,

are strictly prohibited for use with this device.

• Le présent émetteur radio (3568A-RTGZ00) a été approuvé par

Industrie Canada pour fonctionner avec les types d'antenne

énumérés ci-dessous et ayant un gain admissible maximal et

l'impédance requise pour chaque type d'antenne. Les types

d'antenne non inclus dans cette liste, ou dont le gain est supérieur au

gain maximal indiqué, sont strictement interdits pour l'exploitation

de l'émetteur.

Table for filed antenna

Ant.

Brand

Model Name

Antenna Type

Connector

Gain (dBi)

2.4GHz 5GHz

Whayu

C660-510391-A

Dipole Antenna

Reversed-SMA

2.14

2.98

Whayu

C660-510391-A

Dipole Antenna

Reversed-SMA

2.14

2.98

Whayu

C660-510391-A

Dipole Antenna

Reversed-SMA

2.14

2.98

Whayu

C660-510391-A

Dipole Antenna

Reversed-SMA

2.14

2.98

Whayu

C660-510391-A

Dipole Antenna

Reversed-SMA

2.14

2.98

Whayu

C660-510391-A

Dipole Antenna

Reversed-SMA

2.14

2.98

Whayu

C660-510391-A

Dipole Antenna

Reversed-SMA

2.14

2.98

Whayu

C660-510391-A

Dipole Antenna

Reversed-SMA

2.14

2.98

• For product available in the USA/Canada market, only channel 1~11

can be operated. Selection of other channels is not possible.

• Pour les produits disponibles aux États-Unis / Canada du marché,

seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux

n'est pas possible.

• This device and it's antennas(s) must not be co-located or operating

in conjunction with any other antenna or transmitter except in

accordance with IC multi-transmitter product procedures.

• Cet appareil et son antenne (s) ne doit pas être co-localisés

ou fonctionnement en association avec une autre antenne ou

transmetteur.

• The device for the band 5150-5250 MHz is only for indoor usage

to reduce potential for harmful interference to co-channel mobile

satellite systems.

• Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont

réservés uniquement pour une utilisation à l’intérieur afin de réduire

les risques de brouillage préjudiciable aux systèmes de satellites

mobiles utilisant les mêmes canaux.

Summary of Contents for ROG Rapture GT-AC5300

























































































































































Search results

Summary of Contents for ROG Rapture GT-AC5300

Reviews:

Related manuals for ROG Rapture GT-AC5300

Brands by name

Popular brands

ASUSTeK COMPUTER ROG Rapture GT-AC5300, User Manual

Search results

Summary of Contents for ROG Rapture GT-AC5300

Reviews:

Related manuals for ROG Rapture GT-AC5300

Brands by name

Popular brands