Asus Z97-K R2.0 Page 25 User Manual Download

Page: 25 / 88

ASUS Z97-K R2.0

1-15

1.7.2

Internal connectors

Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the serial port module cable to this

connector, then install the module to a slot opening at the back of the system chassis.

The COM module is purchased separately.

CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN1/2)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components. These are not jumpers!

DO NOT place jumper caps on the fan connectors.

•

Ensure that the CPU fan cable is securely installed to the CPU fan connector.

Z97-K R2.0

Z97-K R2.0 Serial port (COM) connector

PIN 1

COM

DCD TXD GND RTS

RXD DTR DSR CTS

CHA_FAN2

CHA FAN PWM

CHA FAN IN

CHA FAN PWR

GND

CPU_FAN

CPU FAN PWM

CPU FAN IN

CPU FAN PWR

GND

CHA_FAN1

CHA FAN PWM

CHA FAN IN

CHA FAN PWR

GND

Z97-K R2.0

Z97-K R2.0 Fan connectors

Summary of Contents for Z97-K R2.0

























































































Search results

Summary of Contents for Z97-K R2.0

Reviews:

Related manuals for Z97-K R2.0

Brands by name

Popular brands

Asus Z97-K R2.0, User Manual

Search results

Summary of Contents for Z97-K R2.0

Reviews:

Related manuals for Z97-K R2.0

Brands by name

Popular brands