Asus Z170-Premium series Manual Download Page 55

Page: 55 / 190

ASUS Z170-PREMIUM Series

1-37

Chapter 1

CPU, water pump, CPU optional, extension, and chassis fan connectors (4-pin
CPU_FAN; 4-pin W_PUMP; 4-pin CPU_OPT; 5-pin EXT_FAN; 4-pin CHA_FAN1-4)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

•

The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.

•

The CPU_FAN connector and CHA_FAN connectors support the ASUS FAN Xpert 3

feature.

•

W_PUMP function support depends on water cooling device.

•

The CPU fan connector detects the type of CPU fan installed and automatically

switches the control modes. To configure the CPU fan’s control mode, go to

Advanced Mode > Monitor > CPU Q-Fan Control

item in BIOS.

•

The chassis fan connectors support DC and PWM modes. To set these fans to DC or

PWM, go to

Advanced Mode > Monitor > Chassis Fan 1-4 Q-Fan Control

items in

BIOS.

The FAN EXTENSION CARD is purchased separately.

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components. These are not jumpers!

DO NOT place jumper caps on the fan connectors!

•

Ensure that the CPU fan cable is securely installed to the CPU fan connector.

Summary of Contents for Z170-Premium series































































































































































































Search results

Summary of Contents for Z170-Premium series

Reviews:

Asus Z170-Premium series, Manual, Page: 55 / 190

Search results

Summary of Contents for Z170-Premium series

Reviews: